Lucerne V8-4.6L (2008)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Remove the stabilizer shaft link bolts.
3. Remove the stabilizer shaft link insulators and spacer.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Loosely install the stabilizer link insulators, spacer, nut and bolt.
Tighten the stabilizer shaft link nut to 15 N.m (11 lb ft).
2. Lower the vehicle.