Lucerne V8-4.6L (2008)
7. Remove the strut to knuckle bolts (3) and the nuts (1).
8. Remove the strut from the vehicle.
Installation Procedure
1. Lower the vehicle.
2. Install the strut to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the strut mount to body retaining bolts.
Tighten the strut mount to body bolts to 47 N.m (35 lb ft).
4. Raise the vehicle.
5. Install the strut to steering knuckle bolts (3) and the nuts (1).
Tighten the strut to knuckle nuts to 147 N.m (108 lb ft).
6. Connect the brake line and retaining bolt to the strut.
7. If applicable, connect the speed sensor bracket and retaining bolt to the strut.