Lucerne V8-4.6L (2008)
2. Adjust the automatic transmission shift lock control.
1. Pull the tab (1) out on the block side (2) of the automatic transmission shift lock control.
2. Shift the column into the NEUTRAL position.
3. Press on the adjuster block (2) to compress the internal adjuster spring to disengage the adjuster teeth. Slide the adjuster block (2) as far away
from the solenoid as possible.
4. Shift the column into the PARK position.
5. Lock in place by pushing the tab (1) back in.
3. Inspect the automatic transmission shift lock control.
4. Reconnect the automatic transmission shift lock control connector.
5. Install the steering column trim covers.
6. Install the knee bolster. Refer to Driver Knee Bolster Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair).
