Lucerne V8-4.6L (2008)
1. Install the oil pan gasket (25).
2. Install the oil pan (24).
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
3. Install the oil pan bolts (23).
Tighten the bolts to 14 N.m (10 lb ft).
4. Lower the vehicle.
Notice: Do not overfill the transmission. Overfilling will result in foaming, loss of fluid, and possible damage to the transmission.
5. Fill the transaxle with DEXTRON(R) III. Refer to Fluid Capacity Specifications.
6. Place the gear selector in the Park position.
7. Start the engine.
8. Run the engine at a slow idle. Do NOT race the engine.
9. Adjust the fluid level.
10. Inspect for leaks.