Lucerne V8-4.6L (2008)
Wheel Bearing: Service and Repair
Front Suspension
Front Wheel Bearing and Hub Replacement
Tools Required
J 28733-B Front Hub Spindle Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
3. Clean the drive axle threads of all dirt.
4. Insert a drift punch or a screwdriver into the caliper and the rotor in order to prevent the rotor from turning.
5. Remove the drive axle nut.
6. Remove the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement).
7. Disconnect the antilock brake system (ABS) front wheel speed sensor connector. Unclip the connector from the dust shield.
8. Remove the wheel bearing/hub retaining bolts.