Park Avenue V6-231 3.8L VIN L SFI (1993)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension
REAR STRUT
Remove or Disconnect
CAUTION: Support control arm with a suitable jack. The control arm must be supported to prevent the coil spring from forcing the control
arm downward causing component damage and possible bodily injury.
NOTICE: The knuckle must be restrained after the strut to knuckle bolts have been removed. Failure to observe this may cause ball joint damage.
Fig. 3 Strut Assembly
1. Trunk side cover.
2. Wheel and tire.
3. If ELC-equipped, air tube from strut.
