buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

01-07-30-036H|Page 5801 > < 01-07-30-036H
Page 1
background image

Valve Body: All Technical Service Bulletins
TCC - Doesn't Apply/Slipping Condition

Bulletin: 93-74T60-5

Date: May '93

Ref.No.: 93-137-4T60

Corp.Ref.No.: 377119

SUBJECT:
NO/SLIPPING TORQUE CONVERTER CLUTCH (TCC) WHEN COMMANDED ON (SCREENS ADDED TO PWM SOLENOID)

MODELS AFFECTED:
1993 PARK AVENUE/ULTRA, LESABRE AND RIVIERA

CONDITION: (Figure 1)

Some 1993 vehicles equipped with a HYDRA-MATIC 4T60-E (RPO M13) transaxle built on or before Julian Date 026 (January 26, 1993) may exhibit
no TCC apply, or a slipping TCC condition (possible code 039).

NOTE:
The PWM will normally misoperate in either a full apply or a full slip mode. These conditions should not be confused with a TCC chuggle or TCC
shudder which is more likely engine performance related.

NOTE:
Excessive heat on torque converter may be visible when TCC slipping condition exists.

01-07-30-036H|Page 5801 > < 01-07-30-036H