Park Avenue V6-231 3.8L VIN L SFI (1993)
Wiper Motor: Service and Repair
1.
Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2.
Remove wiper arms.
3.
On 1989-91 models, remove cowl cover.
4.
On 1992 models, remove air inlet screen assembly.
5.
On all models, disconnect wiper arm drive link from crank arm.
6.
Disconnect motor electrical connectors.
7.
Remove wiper motor attaching screws, then remove motor guiding cranking arm through hole.
8.
Reverse procedure to install.
9.
Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.