Park Avenue V6-3.8L SC VIN 1 (2005)
Amplifier: Service and Repair
AMPLIFIER REPLACEMENT
REMOVAL PROCEDURE
1. Open the rear compartment.
2. Disconnect the speaker electrical connectors.
3. Loosen the 2 forward fasteners (2).
4. Remove the 2 rearward fasteners (3).
5. Slide the amplifier rearward to remove.
INSTALLATION PROCEDURE
1. Slide the amplifier up and under the forward fasteners (2) in the amplifier bracket.
2. Install the 2 rearward amplifier fasteners (3).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the amplifier fasteners to 7 N.m (62 lb ft).
3. Connect the electrical connectors.