Park Avenue V6-3.8L SC VIN 1 (2005)
Cowl Moulding / Trim: Service and Repair
Air Inlet Grille Panel Replacement
Air Inlet Grille Panel Replacement
Removal Procedure
1. Remove the wiper arm assemblies. Refer to Wiper Arm Replacement.
2. Remove the retainers (3, 4).
3. Disconnect the washer hoses (2) from the air inlet grille panel.
4. Remove the air inlet grille panel (1).
Installation Procedure
1. Connect the washer hoses (2) to the air inlet grille panel.
2. Install the air inlet grille panel (1).
Important: Install the retainers in the numerical sequence indicated.
3. Install the retainers.
4. Install the wiper arm assemblies. Refer to Wiper Arm Replacement.
