Park Avenue V6-3.8L SC VIN 1 (2005)
Rear Door Weatherstrip: Service and Repair
Rear Door Weatherstrip Replacement
Weatherstrip Replacement - Rear Door
Removal Procedure
1. Remove the push-in retainer (2) from the upper front corner of the door.
2. Remove the weatherstrip (1) from the retainer along the header and B-pillar.
3. Remove the door mounted weatherstrip (1) at the bottom of the door by removing the push-in fasteners.
Installation Procedure
1. Install the push-in retainer (2) through the weatherstrip in the upper front corner of the door.
2. Install the weatherstrip (1) into the channel along the header and B-pillar.
3. Secure the weatherstrip (1) to the bottom of the door using the push-in retainers.