Park Avenue V6-3.8L SC VIN 1 (2005)
Rear Door Weatherstrip: Service and Repair
Rear Side Door Bottom Auxiliary Sealing Strip Replacement
Sealing Strip Replacement - Rear Door Bottom Auxiliary
Removal Procedure
1. With the door open, remove the rear door bottom sealing strip fasteners.
2. Remove the rear door bottom sealing strip.
Installation Procedure
1. Install the rear door bottom sealing strip on to the inside lower door edge.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the fasteners.
Tighten the fasteners to 0.8-1.6 N.m (7-14 lb in).
