Park Avenue V6-3.8L SC VIN 1 (2005)
Front Subframe: Service and Repair
Frame Replacement - Front
Tools Required
J 28467-A Universal Engine Support Fixture
Removal Procedure
1. Install the J 28467-A to support the engine.
2. Ensure the engine support fixture is stable on the strut towers.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
4. Remove the fasteners retaining the rack and pinion at the left side of the vehicle.
5. Remove the front tires and wheels. Refer to Tire and Wheel Removal and Installation.
6. Remove the engine splash shield.
7. Separate the ball joints from the steering knuckle. Refer to Lower Control Arm Replacement.
8. Remove the front air deflector. Refer to Air Deflector Replacement - Front (See: Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair/Air
Deflector Replacement - Front) in Body Front End.
9. Remove the brackets retaining the power steering lines (1, 2) at the engine frame.
10. Remove the fastener retaining the rack and pinion at the right side of the vehicle.
