Park Avenue V6-3.8L SC VIN 1 (2005)
5. Install the nut and the bolt to retain the rear transaxle mount to the bracket.
Tighten the fasteners to 40 N.m (30 lb ft).
6. Install the fastener to retain the front transaxle mount to the engine frame.
Tighten the fastener to 40 N.m (30 lb ft).
7. Install the fastener to retain the rack and pinion at the right side of the vehicle.
Tighten the bolts to 33 N.m (24 lb ft).
8. Install the brackets to retain the power steering lines (1 and 2) at the engine frame.
9. Install the front air deflector. Refer to Air Deflector Replacement - Front (See: Spoilers, Flaps, and Air Dams/Air Dam/Service and Repair/Air
Deflector Replacement - Front) in Body Front End.
10. Install the ball joints to the steering knuckle. Refer to Lower Control Arm Replacement.
11. Install the engine splash shield.
12. Install the front tires and wheels. Refer to Tire and Wheel Removal and Installation.
13. Install the bolts to retain the rack and pinion at the left side of the vehicle.
Tighten the bolts to 33 N.m (24 lb ft).
