Park Avenue V6-3.8L SC VIN 1 (2005)
Glove Compartment: Service and Repair
Latch Replacement - Instrument Panel (I/P) Compartment
Latch Replacement - Instrument Panel (I/P) Compartment
Removal Procedure
1. Partially open the IP compartment.
2. Pull down the stops. Allow the IP compartment to travel past the stops.
3. Remove the 5 fasteners (1) that connect the IP compartment bucket to the IP compartment door.
4. Remove the IP compartment bucket from the IP compartment door.
5. Remove the 2 fasteners (3) from the latch assembly.
6. Disengage the rod (2) from the handle to the latch.
Note the position of the rod for the proper installation.
7. Remove the latch from the IP compartment.
Installation Procedure
1. Partially install the latch.
Install the rod (2) from the latch assembly to the handle.
2. Install the latch assembly and the fasteners (3).
3. Install the IP compartment bucket to the IP compartment door.
4. Install the 5 fasteners (1) in order to fasten the IP compartment bucket to the IP compartment door.
