Park Avenue V6-3.8L SC VIN 1 (2005)
Sunroof / Moonroof Panel: Service and Repair
SUNROOF WINDOW REPLACEMENT
REMOVAL PROCEDURE
1. Remove the 3 screws from the trough and shield assembly.
CAUTION: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in
order to reduce the chance of personal injury.
2. Slide the trough and shield assembly to the rear.
3. Cycle the window panel to the vent position.
4. Remove the 3 screws (1) from each side of the window panel.
5. Remove the window panel from the opening.
INSTALLATION PROCEDURE
1. Install the window panel in the opening.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 3 screws (1) to each side of the window panel.
Tighten the screws to 3 N.m (27 lb in).
3. Close the window panel to the flush position.
4. Install the 3 screws to the trough and shield assembly.
5. Adjust the window panel if necessary. Refer to Sunroof Window Height and Opening Fit Adjustment.