Park Avenue V6-3.8L SC VIN 1 (2005)
4. Secure the electrical harness clips to the rear drain hose.
5. Connect the electrical connectors to the sunroof motor.
6. Secure the harness (1) to the sunroof motor with new electrical tape.
7. Connect the electrical connectors to the sunroof control module.
8. Install the control module to the sunroof module.
9. Ensure the locking tabs are secure.
10. Secure the electrical harness to the drive cable tube with 2 new tie wraps.
11. Verify the operation of the sunroof.
12. Install the headliner.