Park Avenue V6-3.8L SC VIN 1 (2005)
Power Seat Switch: Service and Repair
Lumbar Switch Replacement
LUMBAR SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the seat switch bezel.Pull outward on the sides of the switch plate (1) to disengage from seat.
2. Disconnect the electrical connectors.
3. Disengage the retaining tabs to remove switch.
INSTALLATION PROCEDURE
1. Align the switch to the bezel.
2. Fasten the switch to the bezel by pushing downward.
3. Connect the electrical connectors.
4. Align the bezel to the seat (1).Push inward to engage the retaining clips.
