Park Avenue V6-3.8L SC VIN 1 (2005)
9. Remove the 3 screws and remove the height adjuster front trim cover.
10. Work the cover and pad up on the seat back frame.
11. Remove the lower seat belt retractor trim cover.
12. Remove the seat belt retractor assembly retaining nut and remove the retractor assembly.
13. Feed the lower seat belt retractor assembly through the height adjuster opening and remove the cover and pad.
14. Remove the seatback cover (2) from the seatback cushion (1).
Installation Procedure
1. Feed the seat belt retractor assembly through the height adjuster opening in the cover and pad.
Notice: Refer to Fastener Notice in Cautions and Notices.