Park Avenue V6-3.8L SC VIN 1 (2005)
Acceleration/Deceleration Sensor: Service and Repair
Lateral Accelerometer Replacement
Removal Procedure
1. Turn OFF the ignition.
2. Remove the rear seat cushion.
3. Disconnect the lateral accelerometer sensor electrical connector (2).
4. Remove the 2 lateral accelerometer sensor mounting screws (1).
5. Remove the lateral accelerometer sensor (3).
Installation Procedure
1. Install the lateral accelerometer sensor (3).
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the 2 lateral accelerometer sensor mounting screws (1).
Tighten the 2 lateral accelerometer sensor mounting screws to 2.4 Nm (21 inch lbs.).
3. Connect the lateral accelerometer sensor electrical connector (2).
4. Install the rear seat cushion.
5. Perform the ABS Diagnostic System Check. See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System Check -
Vehicle
