Park Avenue V6-3.8L SC VIN 1 (2005)
11. Clean the surface of the EBCM/BPMV assembly.
12. Important: The EBCM cannot be repaired. If faulty, the unit must be replaced.
Separate the EBCM (2) from the BPMV (1).
Installation Procedure
1. Clean the seal surface of the BPMV.
2. Install the EBCM (2) to the BPMV (1).
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the 6 EBCM to BPMV screws (2).
Tighten the 6 screws to 3.2 Nm (28 inch lbs.).
4. Connect the BPMV electrical connector (2) to the EBCM (3).
