Park Avenue V6-3.8L SC VIN 1 (2005)
6. Using a flat bladed tool or punch carefully remove the caliper pin boots (2) from brake caliper bracket (1) and discard.
Important: Wipe the old grease from the caliper pin bolts with a clean shop towel.
7. Inspect the brake caliper bracket for cracks. If cracked, replace bracket.
Installation Procedure
1. Apply a thin coat of NIGLUBE(R) to the caliper guide pin (4).
2. Install new caliper pin bolt boots (2) to the caliper.
3. Install the brake caliper bracket (3).
4. Install the brake pad retainers (1) to the caliper bracket.
5. Install the brake pads (2) to the caliper bracket.