Park Avenue V6-3.8L SC VIN 1 (2005)
7. Remove the brake hose to caliper bolt from the brake caliper
8. Remove the brake hose born the brake caliper.
9. Remove and discard the two copper brake close gaskets. These gaskets may be stuck to the brake caliper and/or the brake hose end.
Important: Install a rubber cap or plug to the exposed brake pipe, fitting end in order to prevent brake fluid loss and/or contamination.
10. Install a rubber plug into the brake hose to caliper bolt hole of the brake caliper.
11. Remove the hose bracket bolt from the strut assembly and remove the hose.
Installation Procedure
1. Remove the rubber plug from the brake hose to caliper bolt hole of the brake caliper. Important: Install NEW copper brake hose gaskets.
2. Assemble the brake hose, the NEW copper brake hose gaskets, and the brake hose bolt to the brake hose.
