Park Avenue V6-3.8L SC VIN 1 (2005)
5. Connect the intermediate park brake cable connector (3) to the right park brake cable (2).
6. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
7. Connect the intermediate park brake cable (2) to the park brake connector (1).
8. Install the right park brake cable (2) into the park brake cable guide (1).
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the right park brake cable guide bolt (3).
Tighten the right park brake cable guide bolt to 24 Nm (18 ft. lbs.).
10. Install the front park brake cable to the cable guides.
11. Install the right tire and wheel assembly.
12. Lower the vehicle.
13. To ensure that the park brake cable retainers are seated, cycle the park brake pedal 1 to 2 times.
