Park Avenue V6-3.8L SC VIN 1 (2005)
10. Remove the retaining screws (1) and straps from the heater core.
11. Remove the heater core.
INSTALLATION PROCEDURE
1. Install the heater core into the HVAC module.
2. Install the retaining straps and screws (1).
Tighten the screws to 1.5 N.m (18 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the heater core cover.
4. Install the attaching screws.
Tighten the screws to 1.4 N.m (12 lb in).
5. Install the air filter access cover.
Tighten the screws to 1.4 N.m (12 lb in).
6. Install the heater core heat shield cover.
7. Install the auxiliary air distribution duct.
8. Install the console assembly.
9. Install the heater hoses using the J 38185.
10. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
