Park Avenue V6-3.8L SC VIN 1 (2005)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement (Right)
Valve Rocker Arm Cover Replacement - Right
Removal Procedure
1. Remove the fuel injector sight shield.
2. Disconnect the right spark plug wire harness and position aside.
3. Remove the drive belt tensioner.
4. Disconnect the vacuum brake booster hose from the vacuum connections and position aside.
5. Disconnect the MAP sensor connector and hose.
6. Remove the MAP sensor bracket and bolts.
7. Remove the right valve rocker arm cover bolts.
Important: If the valve rocker arm cover adheres to the cylinder head, remove the valve rocker arm cover by bumping the end of the valve rocker
arm cover with the palm of your hand or a soft rubber mallet.
8. Remove the right valve rocker arm cover.
9. Remove the right valve rocker arm cover gasket.
10. Clean the sealing surface on the cylinder head.
11. Clean the valve rocker arm cover bolts of all thread locking adhesive.
12. Clean and inspect the valve rocker arm cover.
Installation Procedure