Park Avenue V6-3.8L SC VIN 1 (2005)
9. Install the round tube of the front support assembly J 28467-4A through the large hole in the radiator shelf tube, J 28467-2A. The hole used in the
radiator shelf tube J 28467-2A depends on the vehicle application.
10. Place the rubber padded foot of the front support assembly J 28467-4A on the upper tie bar.
11. Install the 7/16 inch x 2.0 inch quick release pin J 28467-9 through the hole in the front support assembly J 28467-4A in order to level the radiator
shelf tube J 28467-2A.
12. Install the cross bracket assembly J 28467-1A.
13. Hand tighten the cross bracket assembly J 28467-1A wing nuts.
14. Install the lift hook J 28467-7A through the lift hook bracket J 28467-6A.
15. Install the 1/2 inch lift hook washer and lift hook wing nut J 28467-34 onto the lift hook J 28467-7A.
