Park Avenue V6-3.8L SC VIN 1 (2005)
6. Remove the following components:
6.1.
The oil filter adapter.
6.2.
The oil filter adapter gasket.
6.3.
The oil pressure relief valve.
6.4.
The oil pressure relief valve spring.
7. Clean all parts in a suitable solvent and allow to dry.
8. Inspect the following components:
^
Oil pressure valve for burrs
^
Valve bore for burrs
^
Valve spring for loss of tension
Installation Procedure
1. Install the spring into the engine front cover.
2. Install the oil pressure valve into the engine front cover.
3. Install a new oil filter adapter gasket.
4. Install the oil filter adapter.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil filter adapter bolts.
^
Tighten the oil filter adapter bolts to 15 Nm (11 ft. lbs.). Use the J 36660-A to tighten the oil filter adapter bolts an additional 50 degrees.
6. Lightly oil the replacement oil filter gasket with clean oil.
Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
7. Install the new oil filter.
^
Tighten the new oil filter to 3/4 to 1 full turn, after the oil filter gasket contacts the oil filter mounting surface.
