Park Avenue V6-3.8L SC VIN 1 (2005)
Timing Cover: Service and Repair
Engine Front Cover Replacement
^
Tools Required
-
J 36660-A Torque Angle Meter
Removal Procedure
1. Remove the right engine mount bracket.
2. Remove the drive belt tensioner assembly.
3. Remove the crankshaft balancer.
4. Remove the crankshaft sensor shield.
5. Remove the crankshaft sensor.
6. Remove the oil pan to engine front cover bolts.
7. Remove the engine front cover attaching bolts.
8. Remove the engine front cover.
9. Inspect the timing chain for overall in and out movement. Movement should not exceed 25 mm (1 inch).
10. Inspect the timing sprockets for wear.
11. Clean the gasket mating surfaces at the cylinder block.
12. If the oil pan gasket is excessively swollen, the oil pan must be removed and the gasket replaced.
13. Clean and inspect the engine front cover.
Installation Procedure
