Park Avenue V6-3.8L SC VIN 1 (2005)
Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 2
SIR DISABLING AND ENABLING ZONE 2
DISABLING PROCEDURE
1. Turn the steering wheel so that the vehicles wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Locate the underhood fuse center, then remove the fuse center top cover.
5. Locate and remove the SIR fuse from the underhood fuse center.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
6. Remove the left center pillar trim panel.
7. Remove the left side impact sensor (SIS) connector position assurance (CPA) (1) from the SIS (3).
8. Remove the SIS connector (2) from the SIS (3).
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. Connect the SIS connector (2) to the SIS (3).
3. Connect the CPA (1) to the SIS (3).
4. Install the left center pillar trim panel.
