Park Avenue V6-3.8L SC VIN 1 (2005)
Parking Assist Warning Indicator: Service and Repair
OBJECT ALARM MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear compartment trim.
2. Remove the fasteners (2) securing the rear park assist module (1).
3. Disconnect the electrical connector (3).
INSTALLATION PROCEDURE
1. Reconnect the electrical connector (3).
2. Install the fasteners (2) securing the rear park assist module (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the rear compartment trim.