Park Avenue V6-3.8L SC VIN 1 (2005)
Underhood Lamp: Service and Repair
UNDERHOOD LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood (2).
2. Disconnect the electrical connector (3) from the underhood lamp (1).
3. Using a 3.18 mm (1/8 in) drill bit, remove the rivets retaining the underhood lamp (1) to the hood (2).
4. Remove the underhood lamp (1).
INSTALLATION PROCEDURE
1. Position the underhood lamp (1) to the hood (2).
2. Install the rivets (3) in order to retain the underhood lamp (1) to the hood (2).
3. Connect the electrical connector (3) to the underhood lamp (1).
4. Close the hood (2).
