Park Avenue V6-3.8L SC VIN 1 (2005)
Alignment: Service and Repair
Rear Toe Adjustment
Rear Toe Adjustment
1. Important: Complete the left and right rear toe adjustments separately, per wheel. Using the following procedure.
Loosen the inner adjustment link cam nut (2).
2. Notice: Refer to Fastener Notice in Cautions and Notices.
In order to adjust the toe, rotate the cam bolt.
^
Tighten the cam nut to 91 Nm (67 ft. lbs.).
3. Tighten the tie rod nut.
^
Tighten the tie rod nut to 64 Nm (47 ft. lbs.).
4. Recheck the toe setting after tightening.
5. Readjust the toe setting if necessary.