Park Avenue V6-3.8L SC VIN 1 (2005)
Installation Procedure
1. Install the power steering return hose to the vehicle.
2. Install the power steering return hose to the power steering pump.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the power steering return hose (4) to the power steering gear.
Tighten the power steering return hose to the power steering gear to 30 Nm (22 ft. lbs.).
4. Install the power steering gear heat shield.
5. Lower the vehicle.
6. Bleed the power steering system.
7. Check the power steering system for leaks.