Park Avenue V6-3.8L SC VIN 1 (2005)
-
Tighten the fasteners on the wheel house (1) to 2 N.m (17 lb in).
-
Tighten the fastener (3) to 15 N.m (11 lb ft).
2. Install the electrical connectors to the electrical fuse block.
3. Install the fuse block to the electrical center base.
4. Install the MaxiFuse(R) holder to the electrical center base.
Tighten the fastener securing MaxiFuse(R) holder to the electrical center base to 2 N.m (17 lb in).
5. Connect the battery cables to the fuse block.
Tighten the fastener to 15 N.m (11 lb ft).