Park Avenue V6-3.8L SC VIN 1 (2005)
EGR Tube: Service and Repair
Exhaust Gas Recirculation (EGR) Inlet Pipe Replacement
EXHAUST GAS RECIRCULATION (EGR) INLET PIPE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the exhaust gas recirculation (EGR) valve.
2. Remove the EGR valve outlet pipe.
3. Remove the EGR valve inlet pipe mounting bolt (2) from the exhaust manifold.
4. Remove the mounting bolt (2) and the stud (3) from the EGR valve inlet pipe bracket.
5. Remove the EGR valve inlet pipe assembly (1).
INSTALLATION PROCEDURE
1. Install the EGR valve inlet pipe assembly (1).
2. Install the mounting bolt (2) and the stud (3) to the EGR valve inlet pipe bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt and stud to 50 N.m (37 lb ft).
3. Install the EGR valve inlet pipe bolt (2) to the exhaust manifold.
Tighten the bolt to 29 N.m (21 lb in).
