Park Avenue V6-3.8L SC VIN 1 (2005)
Throttle Cable/Linkage: Service and Repair
Accelerator Controls Cable Bracket Replacement
ACCELERATOR CONTROLS CABLE BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Disconnect the cruise control cable (1) from the throttle lever.
3. Disconnect the cruise control cable (1) from the bracket (2).
4. Disconnect the accelerator cable (2) from the throttle lever.
5. Disconnect the accelerator cable (2) from the bracket (1).
6. Remove the wiring harness clip (1) from bracket (3) if necessary (VIN K only).