Park Avenue V6-3.8L SC VIN 1 (2005)
Brake Switch - TCC: Service and Repair
Torque Converter Clutch/Cruise Control Release Switch Replacement
Removal Procedure
1. Remove the left closeout/insulator panel.
2. Rotate the upper switch (1) counter-clockwise and remove the switch.
3. Disconnect the upper switch electrical connector.
Installation Procedure
1. Important: When installing the torque converter clutch/cruise control release switch, ensure that the brake pedal remains in the full up or at rest
position.
Connect the upper switch (1) electrical connector.
2. Install the upper switch (1) into the upper retainer.
3. Rotate the switch clockwise until fully seated.
4. Adjust the switch.
5. Install the left closeout/insulator panel.