buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 582 > < 2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 580
Page 4
background image

8.1.

Install the floor console's retaining bolts (C) and retaining nuts (F).

8.2.

Align the rear cover; make sure that the air duct connects firmly to the air nozzle. Screw in the cover (E).

8.3.

Install the ashtray/cover (D).

8.4.

Install the ignition switch cover (B).

8.5.

Plug in the immobilizer unit (A) connector. Install the unit, bayonet fitting.

9.

Remove the OnStar(R) control modules and secure the wiring:

9.1.

Remove the right-hand rear luggage compartment trim in accordance with WIS - 8.

Body - Interior equipment - Adjustment/Replacement.

9.2.

Unplug the connectors (A) from the OnStar(R) control modules.

9.3.

Remove the console (B) together with the OnStar(R) control modules.

2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 582 > < 2001 and Older Model Year Vehicles (Except Saab Vehicles)|Page 580