Park Avenue V6-3.8L SC VIN 1 (2005)
Cruise Control Module: Service and Repair
CRUISE CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector site shield.
2. Push the lock release and remove the cruise control cable at the engine bracket and throttle body.
3. Disconnect the cruise control cable (1) and the connector (2) from the module assembly connector (3).
4. Disconnect the electrical connector from the module assembly.
5. Remove the retaining nuts (2) and the module (1) from the mounting studs.
6. Remove the cruise control module bracket bolts (3) from the module bracket (2) and the module (1).
INSTALLATION PROCEDURE
