Park Avenue V6-3.8L SC VIN 1 (2005)
12. Twist together 1 connector wire lead to 1 deployment wire.
13. Inspect that the previous connection is secure.
14. Bend flat the twisted connection.
15. Secure and insulate the connection using electrical tape.
16. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
17. Connect the deployment harness to the steering wheel module yellow connector.
18. Route the deployment harness out of the driver side of the vehicle.
19. Disconnect the driver side impact module yellow connector (1) from the vehicle wiring harness (4) located under the driver seat.
