Park Avenue V6-3.8L SC VIN 1 (2005)
3. Install the guide loop retainer bolt.
Tighten the retainer bolt to 30 N.m (22 lb ft).
4. Use the following steps in order to install the retractor assembly:
1. Align the retaining pin in the key hole.
2. Pull upward on the assembly in order to snap the retaining pin into the top of the key hole.
5. Install the retractor assembly bolt.
Tighten the bolt to 9 N.m (72 lb in).
6. Install the rear seat belt retractor sound barrier (1).
7. Install the rear shelf trim panel.
8. Install the sail panels.
9. Install the seatback and seat cushion.
