Park Avenue V6-3.8L SC VIN 1 (2005)
9. Remove the lower lap belt retractor assembly nut.
10. Remove the lap and shoulder belt retractors as an assembly.
INSTALLATION PROCEDURE
1. Route the upper retractor assembly through the seat back cover and pad opening.
2. Install the upper seat belt retractor.
3. Install the shoulder belt retractor nut.
Tighten the shoulder belt retractor nut to 24 N.m (18 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the lower lap belt retractor assembly.
5. Install the lap belt retractor nut.
Tighten the lap belt retractor nut to 24 N.m (18 lb ft).
6. Install the upper retractor access door.
7. Install the seat back cover and pad.
8. Install the seat trim panels.
9. Install the head restraint.
10. Install the seat side air bag.
11. Install the Seat.
