Park Avenue V6-3.8L SC VIN 1 (2005)
4. Measure from the front outboard control arm bolt center line to the bottom of the control arm wheel bearing and hub face in order to obtain the D
height measurement.
5. Push the rear bumper downward to 38 mm (1.5 inch).
6. Gently remove your hands .Allow the vehicle to settle into position.
7. Repeat the jouncing operation 2 more times for a total of 3 times.
8. Measure the D height dimension.
9. The true D height dimension number is the average of the high and the low measurements.
10. If these measurements are out of specifications, inspect for the following conditions:
^
Improper weight distribution
^
Collision damage
^
Worn or damaged suspension components
