Park Avenue V6-3.8L SC VIN 1 (2005)
1. Install the power steering pressure hose to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the power steering pressure hose to the power steering pump.
Tighten the power steering pressure hose to the power steering pump to 27 Nm (20 ft. lbs.).
3. Install the power steering pressure hose (1) to the power steering gear.
Tighten the power steering pressure hose to the power steering gear to 27 Nm (20 ft. lbs.).
4. Install the retainers and the bolts.
Tighten the retainer bolts to 6 Nm (53 inch lbs.).
5. Install the power steering gear heat shield.
6. Lower the vehicle.
7. Bleed the power steering system.
