Park Avenue V6-3.8L SC VIN 1 (2005)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley Replacement
Power Steering Pulley Replacement
-
Tools Required
-
J25034-C Pulley Remover
-
J25033-C Pulley installer
Removal Procedure
1. Remove the drive belt.
2. Remove the power steering pump.
3. Remove the power steering pulley from the power steering pump Using J25034-C.
Installation Procedure
1. Install the power steering pulley to the power steering pump Using J25033-C.
2. Ensure that the axial tolerance of the power steering pulley on the power steering pump is within 0.25 mm (0.010 inch), plus or minus.
