Park Avenue V6-3.8L SC VIN 1 (2005)
Compressor/Pump: Service and Repair
Air Compressor Replacement
Air Compressor Replacement
Removal Procedure
1. Raise the vehicle and suitably support. Refer to Vehicle Lifting.
Important: Before disconnecting the air hose from the intake air filter or the air compressor, clean the components and the surrounding area to
prevent dirt and other foreign material from entering the ALC system.
2. Disconnect the air tube from the air dryer.
3. Remove the bolt and the harness tie with the air tube from the air compressor bracket.
4. Remove the intake air filter from the vehicle.
5. Remove the vehicle harness connector from the air compressor connector.
6. Remove the two nuts, the bolt, and the air compressor assembly from the vehicle.
