Park Avenue V6-3.8L SC VIN 1 (2005)
Suspension Spring ( Coil / Leaf ): Service and Repair
Coil Spring Insulators Replacement
Coil Spring Insulators Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
1. Raise and support the vehicle so that the control arm hangs freely. Refer to Vehicle Lifting.
2. Remove the tire and wheel assemblies.
3. Support the lower control arm with a jack stand.
4. Remove the absorber lower retaining bolts.
5. Remove the adjustment link retaining nut.
6. Notice: When separating a linkage joint, DO NOT try to disengage the joint by driving a wedge between the joint and the attached part. Seal
Damage may result.
Separate the adjustment link from the knuckle using the J 24319-B.
7. Slowly lower the control arm onto the support assembly.
