Park Avenue V6-3.8L SC VIN 1 (2005)
Installation Procedure
1. Install the shock absorber to the vehicle.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the shock absorber, reinforcement, and the retaining nuts.
^
Tighten the shock absorber upper retaining nuts to 20 Nm (15 ft. lbs.).
Install the shock absorber cover.
3. Install the trunk trim.
4. Install the shock absorber lower retaining bolts.
^
Tighten the shock absorber lower retaining bolts to 24 Nm (18 ft. lbs.).
5. Connect the Automatic Level Control air tube to the shock absorber.
6. Install the tire and wheel.
7. Lower the vehicle.
