Park Avenue V6-3.8L SC VIN 1 (2005)
Wheel Fastener: Service and Repair
Front
Wheel Stud Replacement
^
Tools Required
-
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.
4. Using J 43631 press the stud from the wheel bearing/hub.
Installation Procedure
1. Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.
2. Install the brake rotor.
3. Install the tire and wheel.
4. Lower the vehicle.
